Menu

Welcome to Tech Tubes & Fittings: India's #1 Supplier For Instrumentation Fittings, Pipes, And Valves

We are a leading instrumentation tube fittings manufacturer in India. We supply a wide range of valves, tubes, and fittings. Browse our product catalogue now.

Blog posts : "single ferrule fittings"

Everything you need to know about single ferrule tube fittings

Everything you need to know about single ferrule tube fittings

Thermal cycling and vibration are known to be among the toughest environments for tube fittings. To ensure that the tube fitting does not fail under extreme conditions, these applications necessitate high-precision, leak-free technology. While there are a variety of tube fitting alternatives available, engineers need a solution that minimizes risks while also providing good value for money.

 

Techtube has created a single ferrule tube fitting design known as the compression tube fitting to meet this purpose. These tube fittings are suited for applications in process, power, and instrumentation. The fitting is simple to install and provides a strong anti-vibration hold on the tube with only three pieces required.

 

What is a single ferrule tube fitting?

The tubing is gripped by a single ferrule, which produces a leak-tight seal between the compression nut and the fitting body. In this situation, the single-ferrule serves two purposes at once: it seals the fitting while also locking it in place.

 

Benefits of single ferrule tube fittings

Here are some of the benefits of single ferrule tube fittings.

1. Less leak path

Single ferrule fittings have only two potential leak channels to seal, but double ferrule fittings have three or more potential leak paths to seal.

2. Less body contact

Single ferrule designs make less contact with the body, whereas double ferrule designs make contact with the body across the entire surface. In many applications, this permits the end-load to be concentrated in a smaller region, outperforming double ferrule.

3. Reduce vibration

The use of single ferrule designs creates a cushioning effect that reduces vibration.

4. Improved temperature cycling performance

Metals expand and contract in temperature cycling applications, causing dimensional changes in fitting connections. Single ferrule designs provide a "spring-loaded" action that keeps the fitting body and nut in continuous tension.

5. Installation ease

Single ferrule fittings necessitate the use of a coated nut, which reduces torque. The coating also extends the life of the fitting in service, reducing the need for maintenance.

6. Precision assembly

When there are fewer components, there are fewer things that can go wrong during assembly. Single ferrule fittings also take less time and effort to put together than double ferrule fittings.

 

Conclusion

To avoid leaks and associated damage while working with tube fittings for any piping-based application, a proper and trustworthy seal between the various components is required.

Single-ferrule or dual-ferrule compression fittings might utilize depending on the nature and purpose of the compression fitting application. Making the right decision will ensure that your plumbing system is protected from leaks and damage.

 

For More Details on Single Ferrule Tube Fittings contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Go Back

 Posted in Ferrule Fittings
  Tags single ferrule fittings

Stainless Steel Female Connector Tube Fittings

Everything is set up and maintained using the connection. Every part of human emotions, such as emotional ties, is intertwined with scientific aspects, such as electrical connections. It is vital to have a working relationship with the organizations that aid you or play a key role in your endeavors when it comes to any form of business or construction project.

Female connectors are one of the connecting pieces of any part's joint. Let's review some facts concerning female connector’s tube fittings to make sure you understand.

What are Female connector’s tube fittings?

Female Connector Tube Fittings are a type of industrial fitting that connects various types of tubes and fractional ports to a male parallel pipe thread. These Female Connector Tube Fitting are made from Round Bars and are forged.

Female connectors are used to send electrical, physical, or digital communications. A female connector has one or more holes into which the exposed plug-type conductor of a male connector can be inserted for a secure connection. Female connections can be identified by their physical characteristics. When the male connector is removed, the conductor of a female connector is not exposed like that of a male connector, therefore it cannot come into contact with items by accident.

Female connectors can be found in a variety of places, including regular outlets, phone jacks, and Ethernet jacks. The most common female connector is a two- or three-prong electrical outlet, sometimes known as a wall outlet. Common connectors include telephone jacks, headset jacks, coaxial cable chassis connectors, and D-shell connectors for computer serial and parallel ports.

SS 304L Female Connectors

SS 316L Female Connectors

SS 304H Female Connectors

SS 316H Female Connectors

Brass Female Connectors

Single Female Connectors

Double Female Connectors

Incoloy Female Connectors 

Inconel Female Connectors

Incoloy Female Connectors

Monel Female Connectors

High Pressure Female Connectors

6000PSI Female Connectors

Duplex Female Connectors

Super Duplex Female Connectors

Inconel 600 Female Connectors

Inconel 625 Female Connectors

Inconel 800 Female Connectors

Inconel 825 Female Connectors

Monel 400 Female Connectors

Monel K400 Female Connectors

Hastelloy C276 Female Connectors

Hastelloy C22 Female Connectors

Hastelloy B2 Female Connectors

SS 904L Female Connectors

Alloy 254 Female Connectors

 

 

For More Details on Stainless Steel Female Connector Tube Fittings contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.
 

 

 

 

 

Functions of Female Connector Tube Fittings

Female connectors, like male connectors, can be joined to hardware, wires, or cables. This is the point at which the resemblance ends. Male connectors can be inserted into female connectors with minor holes or gaps.

Keep an eye out for the holes in the electrical outlet that are waiting for a plug to be put in.

Cables for keyboards, screens, and other digital devices can be plugged into female ports on computers. Female connectors come in a variety of sizes, as the female connectors on computers that allow the USB cable to be inserted demonstrate.

A female connector in an industrial application can be as small as a 3/4-inch coupler or fastener or as large as a six-foot pipe. Industrial female connections come in a range of shapes and sizes.

Click Here To Visit The Website Of Tube Fittings, Male Connector, Female Connector, Ferrule Fittings.

Click Here To Contact Us 


For More Details on  Stainless Steel Female Connector Tube Fittings contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.
 

Go Back

0 comments
 Posted in Double Ferrule Fittings
  Tags female connector ferrule fittings single ferrule fittings double ferrule fittings

Why Certain Tube Fittings Connection Are Better Than Others

Measurement and control are at the heart of instrumentation. The field of instrumentation engineering focuses on the design and configuration of process systems. Instruments are devices that are used to measure system properties in a process system. Valves, actuators, pressure gauges, and even IIoT-enabled valves are among the instruments and components that may sense and communicate data about the matter that passes through them as well as their surrounding situations.

 

Most instrumentation connections on the market, from tube fittings to process valves, do not match the rigorous standards that many applications demand. Tubing and tube fittings, often known as compression or instrumentation fittings, transport fluid between system components. Like instrumentation valve connections, their design can range from rolled to cut threads to single to multiple ferrules. Regardless of design, the connection will always fail if it is not properly installed.

 

Single versus Double Ferrule

Single ferrule tube fittings are utilized in less critical applications than double ferrule fittings because they have a lower pressure rating. They do, however, have a popular advantage. Compression fittings with a single ferrule feature one less item, making them faster and easier to install, especially in small spaces. Despite this advantage, twin ferrule fittings have become the standard in the design of measuring and control systems.

 

Double ferrule tube fittings come in the same designs and sizes as single ferrule tube fittings. The double ferrule design consists of a front ferrule that is similar to the single ferrule but with a back ferrule ring that seats into the front ferrule when inserted, resulting in a tighter seal. Due to their strong mechanical hold on the tube, double ferrule compression fittings provide a superior connection. Furthermore, they are preferred for usage on the tubing of varying hardness levels and wall thicknesses.

 

Conclusion 

Instrumentation fittings with rolling threads are best for most applications, and double ferrule tube connections should be used for important operations for greater leak resistance and endurance under high pressure, temperature, and vibration. Threads that have been rolled have better physical properties, more precision, and a high degree of surface finish. They are uniformly produced at high rates of production with no material waste, resulting in cost savings. This should be a top priority when choosing fittings. Another factor to consider is whether to use double ferrule fittings, which have a stronger mechanical grip on the tube than single ferrule fittings.

 

Instrumentation tube fittings are utilized in a variety of industries, including oil and gas, aerospace, industrial, construction, and agricultural machinery.

 

 

For More Details on c contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.
 

 

 

Go Back

0 comments
 Posted in Double Ferrule Fittings
  Tags double ferrule fittings single ferrule fittings

Types of Fittings

Fittings are distinguished based on their connection types and the functions they perform. There are many types of fittings: Compression Fittings, Bite-type Fittings, Mechanical Grip Fittings, Flare Fittings, End Fittings, Threaded Fittings, NPT (National Pipe Thread) Fittings

Compression Fittings:

                      Tube Fittings        SS Connector      Union Tee      Male Elbow

Click Here to Access our Product Gallery for Sample Photos of High Pressure Tube Fittings

Click Here to view additional data on High Pressure Tube Fittings

Check our our other Products : High Pressure Instrumentation Valves, High Pressure Tube Fittings, High Pressure Pipe Fittings 

Compression fittings are fittings which connect tubes using compression on a gasket, ring, or ferrule. The compression is typically made by tightening a nut onto the fitting over the tubing and ferrule, compressing and securing the tubing inside. Standard compression fittings do not require tools to assemble, making them convenient for quick, simple installation. However, they cannot withstand very high pressures and do not have as much flexibility as soldered fittings, making them less functional in systems with vibration, thermal cycling, and other dynamic forces. They also come in a limited number of materials (most commonly brass) and are best suited for metal on metal connections.

Bite-type Fittings:
                                                             
Are compressive fittings with a sharpened ferrule that "bites" the tube when compressed and provides the seal. Bite-type fittings, like standard compressive fittings, require no special tools to assemble but provide a stronger, higher pressure connection.

Mechanical grip Fittings:
                                                        
Mechanical grip fittings are two-ferrule assemblies. The back ferrule grips the tubing while pressing up against the front ferrule, which spring-loads the front ferrule and creates a seal between the tubing and fitting body. These fittings can be reassembled multiple times without damaging components or tubing. They have good resistance to mechanical vibration

Click Here to Access our Product Gallery for Sample Photos of High Pressure Tube Fittings

Click Here to view additional data on High Pressure Tube Fittings

Check our our other Products : High Pressure Instrumentation Valves, High Pressure Tube Fittings, High Pressure Pipe Fittings 

 

Flare Fittings:
                                                       
Consist of a body with a flared or coned end. Special flaring tools are used to install the tube to fit inside the flared end, providing a deep seal. Flare fittings can handle higher pressures and a wider range of operating parameters than standard compression fittings.

End Fittings:

End fittings provide specific surfaces for connecting tubes.

Clamp ends are fittings which allow tubes to be clamped to the connection.

Plain ends are fittings which allow tubes to be connected by adhesive, solder, or other forms. 

Click Here to Access our Product Gallery for Sample Photos of High Pressure Tube Fittings

Click Here to view additional data on High Pressure Tube Fittings

Check our our other Products : High Pressure Instrumentation Valves, High Pressure Tube Fittings, High Pressure Pipe Fittings 

Flange Fittings:
                                            
Flange fittings are ports with flush surfaces perpendicular to the attached tube. These surfaces are joined and sealed via clamps, bolts, and/or welding.

Click Here to Access our Product Gallery for Sample Photos of High Pressure Tube Fittings

Click Here to view additional data on High Pressure Tube Fittings

Check our our other Products : High Pressure Instrumentation Valves, High Pressure Tube Fittings, High Pressure Pipe Fittings 

Threaded Fittings:
                                            
Threaded fittings have screw threads (built-in grooves) on their inner (female) or outer (male) surfaces designed to accept tubing with matching threads. Threads which provide a simple connection but no seal are called straight threads. Tapered threads are designed to provide a tight seal for gases or fluids under pressure. Seal reliability can be improved by adding a coating or seal tape (Teflon). Especially precise threads are called "dry fit", meaning they seal without the need for an additional sealant, which is important in applications where sealant addition could cause contamination or corrosion.

MONEL 400 Tube Fittings, MONEL 400 Instrumentation Tube Fittings, MONEL 400 Ferrule Fittings, MONEL 400 Compression Fittings, MONEL 400 Single Compression Fittings, MONEL 400 Double Compression Fittings, MONEL 400 Single Ferrule Fittings, MONEL 400 Double Ferrule Fittings, MONEL 400 Tube Fittings Manufacturer in India, MONEL 400 Instrumentation Tube Fittings Exporter, High Pressure MONEL 400 Tube Fittings Manufacturer in India, High Pressure MONEL 400 Tube Fittings Exporter, MONEL 401 Tube Fittings, MONEL 401 Instrumentation Tube Fittings, MONEL 401 Ferrule Fittings, MONEL 401 Compression Fittings, MONEL 401 Single Compression Fittings, MONEL 401 Double Compression Fittings, MONEL 401 Single Ferrule Fittings, MONEL 401 Double Ferrule Fittings, MONEL 401 Tube Fittings Manufacturer in India, MONEL 401 Instrumentation Tube Fittings Exporter, High Pressure MONEL 401 Tube Fittings Manufacturer in India, High Pressure MONEL 401 Tube Fittings Exporter, MONEL K500 Tube Fittings, MONEL K500 Instrumentation Tube Fittings, MONEL K500 Ferrule Fittings, MONEL K500 Compression Fittings, MONEL K500 Single Compression Fittings, MONEL K500 Double Compression Fittings, MONEL K500 Single Ferrule Fittings, MONEL K500 Double Ferrule Fittings, MONEL K500 Tube Fittings Manufacturer in India, MONEL K500 Instrumentation Tube Fittings Exporter, High Pressure MONEL K500 Tube Fittings Manufacturer in India, High Pressure MONEL K500 Tube Fittings Exporter, 

Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic are the trademarks of their respective companies.

For More Details on  Types of Fittings contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.
 

Go Back

0 comments
 Posted in General
  Tags types of fittings double ferrule fittings single ferrule fittings compression fittings

Choosing the most appropriate type of Stainless Steel for Single Compression Tube Fittings and Double Compression Tube Fittings

Following are the most important factors you should consider while choosing the  right Stainless Steel for 
your Single Ferrule Compression Tube Fittings and Double Compression Tube Fittings. 

  • Corrosive Environment : Atmospheric, Water, Concentration of particular chemicals, chloride content, presence of acid. 
  • Temperature of Operation : High temperatures usually accelerate corrosion rates and therefore indicate a higher grade. Low temperatures will require a tough austenitic steel.
  • Strength Required – Higher strength can be obtained from the Austenitic, Duplex, Martensitic and PH steels. Other processes such as welding and forming often influence which of these is most suitable. For example, high strength austenitic steels produced by work hardening would not be suitable where welding was necessary as the process would soften the steel.
  • Customer expectation regarding performance of material  – This is an important consideration often missed in the selection process. Particularly, what are the aesthetic requirements as compared to the structural requirements? 
  • There may also be special requirements such as non-magnetic properties to take into account.
  • It must also be borne in mind that steel type alone is not the only factor in material selection. Surface finish is at least as important in many applications, particularly where there is a strong aesthetic component. 
  • Availability: There may be a perfectly correct technical choice of material which cannot be implemented because it is not available in the time required.
  • Cost: Sometimes the correct technical option is not finally chosen on cost grounds alone. However, it is important to assess cost on the correct basis. Many stainless steel applications are shown to be advantageous on a life cycle cost basis rather than initial cost.



For More Details on  Choosing the most appropriate type of Stainless Steel for Single Compression Tube Fittings and Double Compression Tube Fittings contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.
 

Go Back

 Posted in General
  Tags double ferrule fittings single ferrule fittings compression fittings choosing the right stainless steel

Use of Single Ferrule Tube Fittings and Double Ferrule Tube Fittings

Tube Fittings both Single Ferrule Tube Fittings and Double Ferrule Tube Fittings refer to and are used as connective fixtures used to transfer various fluid components. Tube Fittings are generally used with systems designed to transfer substances through straight sections that are outfitted with special joints and connectors. 

Common types of Single Ferrule Tube Fittings and Double Ferrule Tube Fittings include Stainless Steel, Carbon Steel, Brass and Special Alloy (Inconel Tube Fittings, Incoloy Tube Fittings, Monel Tube Fittings, Hastelloy Tube Fittings etc.,). 

Nickel and Chrome Alloy fittings are used for corrosion resistance or to provide aesthetic finishes Tube Fittings are used in various industries like Power Generation, Railways, Oil and Gas, Petroleum, Control and Instrumentation Systems etc.,

Common types of Single Ferrule Tube Fittings and Double Ferrule Tube Fittings include Straight types like Male Connectors, Tube Unions, Bulk Head Tube Unions, Female Connectors etc., Angled and other Fittings include Union Elbows, Male Elbows, Female Elbows, Union Tee, Male Run Tee, Female Run Tee, Male Branch Tee, Female Branch Tee, Union Cross etc., 

The most basic specifications to consider in the preliminary stages of designing Single Ferrule Tube Fittings, Double Ferrule Tube Fittings include material type, tube size and port size. Tube Fittings are most commonly constructed out of metals, especially Stainless Steel, Carbon Steel, Brass, Alloy Steels and Special Alloys.  

Single Ferrule Tube Fittings and Double Ferrule Tube Fittings are a forte of Tech Tubes & Fittings. 

For more details on Single Ferrule Fittings and Double Ferrule Fittings click here
To Inquire us about Single Ferrule Fittings, Double Ferrule Fittings and our other products click here
To send as a Quick Inquiry for a Quick Quote fill in this form

Featured Products
Hastelloy Single Ferrule Tube Fittings, Monel Single Ferrule Tube Fittings, Inconel Single Ferrule Tube Fittings, Steel Single Ferrule Tube Fittings, Brass Single Ferrule Tube Fittings, Incoloy Single Ferrule Tube Fittings, Titanium Single Ferrule Tube Fittings, SMO254 Single Ferrule Tube Fittings, Super Duplex Single Ferrule Tube Fittings, Duplex Single Ferrule Tube Fittings, 
Hastelloy Double Ferrule Tube Fittings, Monel Double Ferrule Tube Fittings, Inconel Double Ferrule Tube Fittings, Steel Double Ferrule Tube Fittings, Brass Double Ferrule Tube Fittings, Incoloy Double Ferrule Tube Fittings, Titanium Double Ferrule Tube Fittings, SMO254 Double Ferrule Tube Fittings, Super Duplex Double Ferrule Tube Fittings, Duplex Double Ferrule Tube Fittings, 

 

 



For More Details on  Use of Single Ferrule Tube Fittings and Double Ferrule Tube Fittings contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.
 

Go Back

 Posted in General
  Tags double ferrule fittings single ferrule fittings compression fittings
6 blog posts