Tech Tubes & Fittings

Tube Fittings, Pipe Fittings, Needle Valve, Ball Valve & more

Blog posts : "double ferrule fittings"

Know the Types of Instrumentation Tube Fittings

Most primary industries, such as aerospace, defense, electricity production, petrochemical industry, oil & gas, chemical, alternative fuels, shipbuilding, and medical equipment, rely on process monitoring instrumentation.

Pressure gauges, fittings, and tubing, as well as flow meters, strain gauges, and level gauges, are all covered by PM&C instrumentation fittings. They're utilized to transmit, monitor, and system control flow, pressure, and temperature, as well as calibrate the system.

Instrumentation fitting elements are crucial to the plant or product grouping's functioning. The instrumentation system's veins and arteries are fittings, valves, and tubing.

Four types of instrumentation tube fitting

  1. Fittings for compression

Compression fittings are the most systematic and easiest to obtain. A consecutive hold on the tube is used in this design. The ferrule coins (compresses) the tube and ensures a secure hold on its surface. Compression fittings outperform other fittings in terms of vibration resistance, not just over-buttweld fittings. This kind of fitting does not necessitate the aim of any particular type of equipment. Hardly slide the tube into the stop relation and fasten it with a boxing twist to the preference torque. Compression fittings are often the least valuable overall convention due to their comfort of the establishment.

  1. Fittings for cones and threads

Cone and Thread connections are occasionally utilized in high-pressure installations, however, they are more commonly employed at pressures up to 15,000 PSI. The tube is a beveled edge and screwless into the fitting, resulting in a firm and tight connection. The tube sides must be precision-shaped with a smooth polished polish and then connected so that the tubing is connected tightly against the junction to ensure a tight seal. Everything is usually done on the job, which increases the assembly time and expense of C&T fittings dramatically. C&T fittings, like compression fittings, can be disassembled and reassembled for maintenance.

  1. Fittings for Butt Weld

A butt weld fitting is a convention that provides the nicest oscillation safety. A well-formed butt weld has the highest tolerance to noise and wears since the metals are permanently bonded together. A butt weld fitting connection, on the other hand, has significant drawbacks, including the expense. A butt weld connection is the most costly of the three basic types of instrumentation fitting components due to the expense of welding equipment, a specialist welder, and additional work time.

  1. Pneumatic Fittings with a Push-To-Connect System

Push-to-connect fittings link tubing with an inner collet and an outer push switch. These composite fittings can be made of poly or nickel-plated metal, polymer, and two phases of plastic components. Push-to-connect air connectors for elastomeric or nylon tubing ensure leak-free and secure couplings for all compressor applications. Push-to-connect pneumatic fittings enable instant connections without the use of tools by continually pressing the tube into the fitting, and disconnections are just as simple.


SS 304  Instrumentation Tube Fittings 
SS 316L Instrumentation Tube Fittings
SS 304H Instrumentation Tube Fittings
SS 316H Instrumentation Tube Fittings
Brass Instrumentation Tube Fittings
Single Instrumentation Tube Fittings
Double Instrumentation Tube Fittings
Incoloy Instrumentation Tube Fittings
Inconel Instrumentation Tube Fittings
Monel Instrumentation Tube Fittings
High Pressure Instrumentation Tube Fittings
6000PSI Instrumentation Tube Fittings
Duplex Instrumentation Tube Fittings
Super Duplex Instrumentation Tube Fittings
Inconel 600 Instrumentation Tube Fittings
Inconel 625 Instrumentation Tube Fittings
Inconel 800 Instrumentation Tube Fittings
Inconel 825 Instrumentation Tube Fittings
Monel 400 Instrumentation Tube Fittings
Monel K400 Instrumentation Tube Fittings
Hastelloy C276 Instrumentation Tube Fittings
Hastelloy C22 Instrumentation Tube Fittings
Hastelloy B2 Instrumentation Tube Fittings
SS 904L Instrumentation Tube Fittings
Alloy 254 Instrumentation Tube Fittings
10000PSI Instrumentation Tube Fittings








Go Back

Stainless Steel Female Connector Tube Fittings

Everything is set up and maintained using the connection. Every part of human emotions, such as emotional ties, is intertwined with scientific aspects, such as electrical connections. It is vital to have a working relationship with the organizations that aid you or play a key role in your endeavors when it comes to any form of business or construction project.

Female connectors are one of the connecting pieces of any part's joint. Let's review some facts concerning female connector’s tube fittings to make sure you understand.

What are Female connector’s tube fittings?

Female Connector Tube Fittings are a type of industrial fitting that connects various types of tubes and fractional ports to a male parallel pipe thread. These Female Connector Tube Fitting are made from Round Bars and are forged.

Female connectors are used to send electrical, physical, or digital communications. A female connector has one or more holes into which the exposed plug-type conductor of a male connector can be inserted for a secure connection. Female connections can be identified by their physical characteristics. When the male connector is removed, the conductor of a female connector is not exposed like that of a male connector, therefore it cannot come into contact with items by accident.

Female connectors can be found in a variety of places, including regular outlets, phone jacks, and Ethernet jacks. The most common female connector is a two- or three-prong electrical outlet, sometimes known as a wall outlet. Common connectors include telephone jacks, headset jacks, coaxial cable chassis connectors, and D-shell connectors for computer serial and parallel ports.

SS 304L Female Connectors

SS 316L Female Connectors

SS 304H Female Connectors

SS 316H Female Connectors

Brass Female Connectors

Single Female Connectors

Double Female Connectors

Incoloy Female Connectors 

Inconel Female Connectors

Incoloy Female Connectors

Monel Female Connectors

High Pressure Female Connectors

6000PSI Female Connectors

Duplex Female Connectors

Super Duplex Female Connectors

Inconel 600 Female Connectors

Inconel 625 Female Connectors

Inconel 800 Female Connectors

Inconel 825 Female Connectors

Monel 400 Female Connectors

Monel K400 Female Connectors

Hastelloy C276 Female Connectors

Hastelloy C22 Female Connectors

Hastelloy B2 Female Connectors

SS 904L Female Connectors

Alloy 254 Female Connectors








Functions of Female Connector Tube Fittings

Female connectors, like male connectors, can be joined to hardware, wires, or cables. This is the point at which the resemblance ends. Male connectors can be inserted into female connectors with minor holes or gaps.

Keep an eye out for the holes in the electrical outlet that are waiting for a plug to be put in.

Cables for keyboards, screens, and other digital devices can be plugged into female ports on computers. Female connectors come in a variety of sizes, as the female connectors on computers that allow the USB cable to be inserted demonstrate.

A female connector in an industrial application can be as small as a 3/4-inch coupler or fastener or as large as a six-foot pipe. Industrial female connections come in a range of shapes and sizes.

Click Here To Visit The Website Of Tube Fittings, Male Connector, Female Connector, Ferrule Fittings.

Click Here To Contact Us 

Go Back

Why Certain Tube Fittings Connection Are Better Than Others

Measurement and control are at the heart of instrumentation. The field of instrumentation engineering focuses on the design and configuration of process systems. Instruments are devices that are used to measure system properties in a process system. Valves, actuators, pressure gauges, and even IIoT-enabled valves are among the instruments and components that may sense and communicate data about the matter that passes through them as well as their surrounding situations.


Most instrumentation connections on the market, from tube fittings to process valves, do not match the rigorous standards that many applications demand. Tubing and tube fittings, often known as compression or instrumentation fittings, transport fluid between system components. Like instrumentation valve connections, their design can range from rolled to cut threads to single to multiple ferrules. Regardless of design, the connection will always fail if it is not properly installed.


Single versus Double Ferrule

Single ferrule tube fittings are utilized in less critical applications than double ferrule fittings because they have a lower pressure rating. They do, however, have a popular advantage. Compression fittings with a single ferrule feature one less item, making them faster and easier to install, especially in small spaces. Despite this advantage, twin ferrule fittings have become the standard in the design of measuring and control systems.


Double ferrule tube fittings come in the same designs and sizes as single ferrule tube fittings. The double ferrule design consists of a front ferrule that is similar to the single ferrule but with a back ferrule ring that seats into the front ferrule when inserted, resulting in a tighter seal. Due to their strong mechanical hold on the tube, double ferrule compression fittings provide a superior connection. Furthermore, they are preferred for usage on the tubing of varying hardness levels and wall thicknesses.



Instrumentation fittings with rolling threads are best for most applications, and double ferrule tube connections should be used for important operations for greater leak resistance and endurance under high pressure, temperature, and vibration. Threads that have been rolled have better physical properties, more precision, and a high degree of surface finish. They are uniformly produced at high rates of production with no material waste, resulting in cost savings. This should be a top priority when choosing fittings. Another factor to consider is whether to use double ferrule fittings, which have a stronger mechanical grip on the tube than single ferrule fittings.


Instrumentation tube fittings are utilized in a variety of industries, including oil and gas, aerospace, industrial, construction, and agricultural machinery.



For more details contact us



Go Back

How does a Ferrule Connector work?

In household and industrial wiring, twisted wires must be inserted into screw terminals or spring-loaded connectors. For industrial equipment, it may take hundreds or even thousands of these connections to automate a task. If even one of these wires comes loose or breaks, you're most likely expecting costly downtime. 


Each connection is therefore fundamental. While the flexibility of the braided wire allows for much easier routing than one would expect from a solid core wire, the ends tend to stick out. This makes the actual connection to a screw or spring-loaded connector a bit risky. In a perfect world, you would have thread woven in the middle and solid at the ends. 

What is a ferrule? 

The ferrule is the small equipment or tools that are very useful for joining, fastening, reinforcing, and sealing any number and type of joints. A ferrule is generally made up of metal and we proposed to the users in various shapes such as circular, narrow, etc. A ferrule can be of plastic but is less preferred due to its resistivity. They can be used in plumbing systems for sealing and ensuring complete prevention of fluid or gas leakage. A ferrule is deformable in that it can be made as per the desired and required situation. 

Working on ferrule connector

A ferrule connector is generally used with wires. With regards to wiring, a ferrule is a short deformable metal cylinder, by and large made from tin-plated copper. This short cylinder (or long ring) is put over a segment of abandoned wire reaching out from stripped protection, then compacted with a creasing instrument to keep the strands intact. Ferrules examined here additionally include an erupted segment toward one side, which effectively directs the strands into the principal pleated area and gives a push to the limit support. 

When folded, the group becomes what for practical purposes resembles the end of a strong central cable. Flaring the ferrule has a few advantages, including the strain relief mentioned above and the way each strand of a cable can now be embedded in a connector without fear of a pair being uprooted sideways after termination. Ferrules significantly reduce clogging of the contact between the cable and connector and even help reduce oxidation of the stranded wires because there is no air gap between them.

Order a ferrule connector from the best manufacturer and supplier Techtube. Enjoy the accuracy and perfection in your work!!

Go Back

What are Ferrule Fittings or Tubing Fittings?

What are Ferrule Fittings or Tubing Fittings What are Ferrule Fittings or Tubing Fittings

Construction is the major activity found across the world. It helps in the building of a house, offices, monuments, etc. Construction is the part where a large proportion of the livelihood is provided. 


There are various materials used in the construction such as cement, tools, steel, brick, etc. But today, this article will tell you about the most essential and required material for construction and that is ferrule fittings. But wait, what are ferrule fittings? Let's first know the meaning and uses of ferrule fittings.

About Ferrule Fittings

Ferrule fittings (also known as tubing fittings) are different types of fittings used while construction. They generally consist of two pieces that ease the person while construction. 


In these kinds of tube fittings, two metal ferrules are taken and then they are pushed against the duct as the fitting is compressed to assure a secure and leakproof mark in the channel. A popular length span of ferrule fittings is between 1/16″ to 2″ for proportional lengths and between 2 to 50 mm for measured lengths. 

The ferrule tube generally consists of the following parts: 

  1. Body
  2. Identification ring 
  3. Inspection check ring 
  4. Front ferrule
  5. Back ferrule 
  6. Nut

Types of Ferrule Fittings

As these ferrule fittings, main elements are the body and nuts, they are classified into two major categories : 

1. Single Ferrule fittings

This ferrule-fitting nose is utilized to fulfill the requirement of front and back ferrule. They are generally hard to install and less preferred. 

2. Double Ferrule Fittings 

This ferrule fitting has both front and back ferrule to ease the work avoiding mess and confusion. They are commonly used and easy to install as compared to single ferrule. 

Uses and advantages of Ferrule Fittings in daily life

The ferrule fittings are very useful for joining or fitting two materials. So, it is widely used in the following aspects: 

1. Joining of two pipelines

When you are constructing something, you need to combine various elements to build up the desired structure. One of the important elements while construction is a pipeline. To have a smooth flow of water or gas at your place you need to have a long channel for the supply. This can be done by joining the pipes and this is easily and accurately done through ferrule fittings. 

2. Perfect alignment in the connector 

When you fit your pipelines with ferrule fittings, you will have a perfect and required alignment in the connectors which makes the connection to be more accurate and reliable. They also help in the secure and protected stripped at the edge of the fiber. 


Tube fittings or ferrule fittings are widely used and produced as they are very helpful while connecting two things. After going through this entire article, you must get the definition, uses, and types of these ferrule fittings. 

Are you looking for Ferrule Fitting or Tube Fittings manufacturer and supplier, Techtubes will be the best place for you. 


Go Back

What are Double Ferrule Fittings?

Double Compression Fittings are used in various industry to quickly and efficiently create leak-free tubing/instrumentation connections. Double ferrule fittings are made for the same purpose, but with different components. It features Nut, two ferrules, and a tube fitting body. 

These double ferrule fittings fittings are available in both metric and fractional tube sizes. Wrapping the union nut around the tube will stain the ferrule and create a strong seal. Double ferrule compression fittings provide a leak-free connection to all tolerances in the tube outer wall, thickness, diameter, and material hardness.

About Double Ferrule Fittings

Double ferrule compression fittings are the most common equipment fittings. They are regularly used in process measurement and control systems in the aerospace, defense, chemical processing plants, medical devices, oil and gas industries. The compression fitting consists of three components: nut, body, and ferrule (single or double). This design creates a sequential grip on the tube. Instrumentation tube fittings are U.N.E.F. or (United National Extra Fine) threads, the size of which is determined by the outer diameter of the tube used. 

The ferrule becomes a coin and is compressed into the tube, providing a firm grip on the surface of the tube. The male side of the Double Ferrule Instrument Fitting has a hole that matches the outer diameter-OD of the tube. In addition, an inner cone is used. The seal is between the front ferrule and the cone. Hold the tube in place by tightening the nut and letting the front and rear ferrules swage into the tube to secure it firmly. This allows flared-free tubes to be used with these connectors.

Features of Double Ferrule Fittings

The new Tactlok® ferrule tube fittings are specially designed for use in instrumentation, process and control systems, analytical equipment, and environmental equipment used in chemical, petroleum, power generation, and pulp and paper mills. Tactlok®  Ferrule Tube Fittings are widely used in other applications and industries where high reliability and quality are required.

Top benefits of Double Ferrule Fittings
The benefits and features of these fittings may vary from manufacturer to manufacturer. These fittings have many properties that make them ideal for use. 

  • The high-quality double ferrule fitting has silver-plated threads on the nuts to prevent galling of the body threads.  
  • These fittings have excellent corrosion resistance.  
  • It has a measurable body. 
  • Zero leaks under a variety of harsh operating conditions. 
  • It provides high resistance to corrosion, high pressure, and extreme temperatures. 
  • These fittings are easy to use and save time and maintenance costs. 
  • These fittings can be reused. 
  • The leak-free fitting connection can withstand high-pressure vacuum and vibration processes. 
  • Double ferrule compression fittings are suitable for low torque operation.

Are you looking for Double Ferrule Fittings or Double Compression Tube fittings, Tech Tubes will be the best stop for you. We are the leading manufacturer and Supplier of Ferrule Fittings, Double ferrule fittings, and many more. 

Thank you for reading our blog! Your comments will help us improve our content, please feel free to post your comments.


Go Back

Types of Fittings

Fittings are distinguished based on their connection types and the functions they perform. There are many types of fittings: Compression Fittings, Bite-type Fittings, Mechanical Grip Fittings, Flare Fittings, End Fittings, Threaded Fittings, NPT (National Pipe Thread) Fittings

Compression Fittings:

                      Tube Fittings        SS Connector      Union Tee      Male Elbow

Click Here to Access our Product Gallery for Sample Photos of High Pressure Tube Fittings

Click Here to view additional data on High Pressure Tube Fittings

Check our our other Products : High Pressure Instrumentation Valves, High Pressure Tube Fittings, High Pressure Pipe Fittings 

Compression fittings are fittings which connect tubes using compression on a gasket, ring, or ferrule. The compression is typically made by tightening a nut onto the fitting over the tubing and ferrule, compressing and securing the tubing inside. Standard compression fittings do not require tools to assemble, making them convenient for quick, simple installation. However, they cannot withstand very high pressures and do not have as much flexibility as soldered fittings, making them less functional in systems with vibration, thermal cycling, and other dynamic forces. They also come in a limited number of materials (most commonly brass) and are best suited for metal on metal connections.

Bite-type Fittings:
Are compressive fittings with a sharpened ferrule that "bites" the tube when compressed and provides the seal. Bite-type fittings, like standard compressive fittings, require no special tools to assemble but provide a stronger, higher pressure connection.

Mechanical grip Fittings:
Mechanical grip fittings are two-ferrule assemblies. The back ferrule grips the tubing while pressing up against the front ferrule, which spring-loads the front ferrule and creates a seal between the tubing and fitting body. These fittings can be reassembled multiple times without damaging components or tubing. They have good resistance to mechanical vibration

Click Here to Access our Product Gallery for Sample Photos of High Pressure Tube Fittings

Click Here to view additional data on High Pressure Tube Fittings

Check our our other Products : High Pressure Instrumentation ValvesHigh Pressure Tube FittingsHigh Pressure Pipe Fittings 


Flare Fittings:
Consist of a body with a flared or coned end. Special flaring tools are used to install the tube to fit inside the flared end, providing a deep seal. Flare fittings can handle higher pressures and a wider range of operating parameters than standard compression fittings.

End Fittings:

End fittings provide specific surfaces for connecting tubes.

Clamp ends are fittings which allow tubes to be clamped to the connection.

Plain ends are fittings which allow tubes to be connected by adhesive, solder, or other forms. 

Click Here to Access our Product Gallery for Sample Photos of High Pressure Tube Fittings

Click Here to view additional data on High Pressure Tube Fittings

Check our our other Products : High Pressure Instrumentation ValvesHigh Pressure Tube FittingsHigh Pressure Pipe Fittings 

Flange Fittings:
Flange fittings are ports with flush surfaces perpendicular to the attached tube. These surfaces are joined and sealed via clamps, bolts, and/or welding.

Click Here to Access our Product Gallery for Sample Photos of High Pressure Tube Fittings

Click Here to view additional data on High Pressure Tube Fittings

Check our our other Products : High Pressure Instrumentation ValvesHigh Pressure Tube FittingsHigh Pressure Pipe Fittings 

Threaded Fittings:
Threaded fittings have screw threads (built-in grooves) on their inner (female) or outer (male) surfaces designed to accept tubing with matching threads. Threads which provide a simple connection but no seal are called straight threads. Tapered threads are designed to provide a tight seal for gases or fluids under pressure. Seal reliability can be improved by adding a coating or seal tape (Teflon). Especially precise threads are called "dry fit", meaning they seal without the need for an additional sealant, which is important in applications where sealant addition could cause contamination or corrosion.

MONEL 400 Tube Fittings, MONEL 400 Instrumentation Tube Fittings, MONEL 400 Ferrule Fittings, MONEL 400 Compression Fittings, MONEL 400 Single Compression Fittings, MONEL 400 Double Compression Fittings, MONEL 400 Single Ferrule Fittings, MONEL 400 Double Ferrule Fittings, MONEL 400 Tube Fittings Manufacturer in India, MONEL 400 Instrumentation Tube Fittings Exporter, High Pressure MONEL 400 Tube Fittings Manufacturer in India, High Pressure MONEL 400 Tube Fittings Exporter, MONEL 401 Tube Fittings, MONEL 401 Instrumentation Tube Fittings, MONEL 401 Ferrule Fittings, MONEL 401 Compression Fittings, MONEL 401 Single Compression Fittings, MONEL 401 Double Compression Fittings, MONEL 401 Single Ferrule Fittings, MONEL 401 Double Ferrule Fittings, MONEL 401 Tube Fittings Manufacturer in India, MONEL 401 Instrumentation Tube Fittings Exporter, High Pressure MONEL 401 Tube Fittings Manufacturer in India, High Pressure MONEL 401 Tube Fittings Exporter, MONEL K500 Tube Fittings, MONEL K500 Instrumentation Tube Fittings, MONEL K500 Ferrule Fittings, MONEL K500 Compression Fittings, MONEL K500 Single Compression Fittings, MONEL K500 Double Compression Fittings, MONEL K500 Single Ferrule Fittings, MONEL K500 Double Ferrule Fittings, MONEL K500 Tube Fittings Manufacturer in India, MONEL K500 Instrumentation Tube Fittings Exporter, High Pressure MONEL K500 Tube Fittings Manufacturer in India, High Pressure MONEL K500 Tube Fittings Exporter, 

Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic are the trademarks of their respective companies.

For any further information or query, please feel free to contact us 

Go Back

Choosing the most appropriate type of Stainless Steel for Single Compression Tube Fittings and Double Compression Tube Fittings

Following are the most important factors you should consider while choosing the  right Stainless Steel for 
your Single Ferrule Compression Tube Fittings and Double Compression Tube Fittings. 

  • Corrosive Environment : Atmospheric, Water, Concentration of particular chemicals, chloride content, presence of acid. 
  • Temperature of Operation : High temperatures usually accelerate corrosion rates and therefore indicate a higher grade. Low temperatures will require a tough austenitic steel.
  • Strength Required – Higher strength can be obtained from the Austenitic, Duplex, Martensitic and PH steels. Other processes such as welding and forming often influence which of these is most suitable. For example, high strength austenitic steels produced by work hardening would not be suitable where welding was necessary as the process would soften the steel.
  • Customer expectation regarding performance of material  – This is an important consideration often missed in the selection process. Particularly, what are the aesthetic requirements as compared to the structural requirements? 
  • There may also be special requirements such as non-magnetic properties to take into account.
  • It must also be borne in mind that steel type alone is not the only factor in material selection. Surface finish is at least as important in many applications, particularly where there is a strong aesthetic component. 
  • Availability: There may be a perfectly correct technical choice of material which cannot be implemented because it is not available in the time required.
  • Cost: Sometimes the correct technical option is not finally chosen on cost grounds alone. However, it is important to assess cost on the correct basis. Many stainless steel applications are shown to be advantageous on a life cycle cost basis rather than initial cost.

Go Back

Use of Single Ferrule Tube Fittings and Double Ferrule Tube Fittings

Tube Fittings both Single Ferrule Tube Fittings and Double Ferrule Tube Fittings refer to and are used as connective fixtures used to transfer various fluid components. Tube Fittings are generally used with systems designed to transfer substances through straight sections that are outfitted with special joints and connectors. 

Common types of Single Ferrule Tube Fittings and Double Ferrule Tube Fittings include Stainless Steel, Carbon Steel, Brass and Special Alloy (Inconel Tube Fittings, Incoloy Tube Fittings, Monel Tube Fittings, Hastelloy Tube Fittings etc.,). 

Nickel and Chrome Alloy fittings are used for corrosion resistance or to provide aesthetic finishes Tube Fittings are used in various industries like Power Generation, Railways, Oil and Gas, Petroleum, Control and Instrumentation Systems etc.,

Common types of Single Ferrule Tube Fittings and Double Ferrule Tube Fittings include Straight types like Male Connectors, Tube Unions, Bulk Head Tube Unions, Female Connectors etc., Angled and other Fittings include Union Elbows, Male Elbows, Female Elbows, Union Tee, Male Run Tee, Female Run Tee, Male Branch Tee, Female Branch Tee, Union Cross etc., 

The most basic specifications to consider in the preliminary stages of designing Single Ferrule Tube FittingsDouble Ferrule Tube Fittings include material type, tube size and port size. Tube Fittings are most commonly constructed out of metals, especially Stainless Steel, Carbon Steel, Brass, Alloy Steels and Special Alloys.  

Single Ferrule Tube Fittings and Double Ferrule Tube Fittings are a forte of Tech Tubes & Fittings. 

For more details on Single Ferrule Fittings and Double Ferrule Fittings click here
To Inquire us about Single Ferrule Fittings, Double Ferrule Fittings and our other products click here
To send as a Quick Inquiry for a Quick Quote fill in this form

Featured Products
Hastelloy Single Ferrule Tube Fittings, Monel Single Ferrule Tube Fittings, Inconel Single Ferrule Tube Fittings, Steel Single Ferrule Tube Fittings, Brass Single Ferrule Tube Fittings, Incoloy Single Ferrule Tube Fittings, Titanium Single Ferrule Tube Fittings, SMO254 Single Ferrule Tube Fittings, Super Duplex Single Ferrule Tube Fittings, Duplex Single Ferrule Tube Fittings, 
Hastelloy Double Ferrule Tube Fittings, Monel Double Ferrule Tube Fittings, Inconel Double Ferrule Tube Fittings, Steel Double Ferrule Tube Fittings, Brass Double Ferrule Tube Fittings, Incoloy Double Ferrule Tube Fittings, Titanium Double Ferrule Tube Fittings, SMO254 Double Ferrule Tube Fittings, Super Duplex Double Ferrule Tube Fittings, Duplex Double Ferrule Tube Fittings, 

Go Back

Important Points to consider while purchasing Ferrule Fittings

Single Ferrule Tube Fittings or Double Ferrule Tube Fittings are available in several makes and standards
around the globe. These fittings are used for extremely critical applications. These come in various pressure
ranges, moc, sizes and grades. 

The base of the use of the fitting is to hold the Tube in such an extremely firm manner to cause zero friction
zero leakage. The buyer 'must' consider these points prior to buying the products. 

  • The eligibility of the Single Ferrule Tube Fittings or Double Ferrule Tube Fittings should be considered while assembling it with a thin wall tube or thick wall tube. This shall ensure that the pipe is not affected.
  •  The most critical criteria of buying single compression fittings / double compression fittings is corrosion. Buyer must check and ensure that the fittings are free from any kind of rust or contamination. The single compression fittings / double compression fittings that are not rust free may weaken the entire structure. 
  • The single ferrule fittings / double ferrule fittings must be free of contamination. For highly critical services like Oxygen Service, it is very important to install contamination free and rust free fittings. 
  • For longer life and lesser maintenance of these products it is very important to choose the right Grade. 
  • The fittings should take less time and labor to install. Moreover the biting of the ferrule should be easy and hassle free. 
  • Ferrule is the heart of the fittings. Basically there are 3 part of the fittings, namely The Body, The Nut and The Ferrule(s). Out of these the ferrule is most important part which is the major reason of keeping the tube intact with the fitting. Thus causing no leakage. 
  • The ferrule should be heat treated as per requirements. 

Single Ferrule Fittings and Double Ferrule Fittings are available in markets. However, it is extremely important to identify the quality of fittings, the dimensions and minimum required length of threads, the quality of ferrule especially. It is essential to buy it from a genuine manufacturer which will help the buyer to retain the strength of the entire structure. 

Go Back

10 blog posts