Menu

Tech Tubes & Fittings

Tube Fittings, Pipe Fittings, Needle Valve, Ball Valve, Manifold Valves & more

Blog posts : "2 way manifold valve"

Manifold Valve- Uses, Types, Industries

To get the best manifold valve from the best manufacturer and supplier Techtube, let's take a look at its type and use. Let's get started. 

Uses of Manifold Valves

Depending on the need, manifolds are employed in my various fluid power applications. Manifolds can be used to mount valves or to consolidate pipework in both hydraulics and pneumatics. They are the contact between the valves and the ports to be piped into when they are used for installing valves.

 

Manifolds can also be used for purposes other than valving. To save on plumbing, a manifold might simply be a chamber with two or more ports connected in series. A return line manifold with six smaller ports connecting to one large tank port, for example, eliminates the need for a series of expensive together fittings, saving money and minimizing the risk of leakage.

 

A manifold can also be utilized in pressure lines, which cleans up the plumbing and improves the aesthetics. Now let's get to the types of manifold valves. 

Types of manifold valves

Manifold valves come in four different forms. They are as follows:

 

1. Inline or direct connect Valve for the manifold

Direct connect manifolds have female or male process connections and are also known as inline, block and bleed, and block and bleed manifolds. To connect this type of manifold to transmitters, male National Pipe Thread is used (NPT).

 

For these manifolds, only a 2-valve assembly with a 12" NPT process connection is available. Female process connections are normal on these manifolds, although male process connections are also available.

 

2. Coplanar Manifold valve

Valve Manifolds that are coplanar 3-valve assembly with direct process connection on a coplanar manifold Valve Manifolds that are coplanar 3-valve assembly with direct process connection on a coplanar manifold Valve Manifolds that are coplanar 3-valve assembly with direct process connection on a coplanar manifold Valve Manifolds that are coplanar 3-valve assembly with direct process connection on a coplanar

The process connection enters from the bottom of coplanar manifolds, obviating the requirement for a separate process connection.

 

3. Traditional Manifold valve

Traditional manifolds have a side connector. It's possible to get them with two or three valves. Some traditional manifolds require a flange, whereas others do not. These manifolds come with 12" and 14" process connectors.

 

4. Conventional manifold valve

Conventional Manifolds are a type of manifold that has been around for a long time. A traditional manifold has a 3-valve arrangement. If you need a totalizer manifold on the side of a process flange rather than immediately on a pressure transmitter sensor, you'll need to use a typical manifold. Alternative and classic flanges are terms used to describe these flanges. Manifolds with two, three, or five valves are offered. On the instrument side, there is a 2 18" center-to-center connection.

 

 



For More Details on  Manifold Valve- Uses, Types, Industries contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies. 

 

Go Back

Functions of a Manifold Valve How to maintain a Manifold Valve?

When you are using technology in your enterprise, you need to have an operating system that is proper and accurate. For this, smooth working of your machines or devices is required and they are directly affected by the sufficient availability of fixtures and fittings in them. This helps the operator to have a strong command of controlling and preventing leakages. 

 

Let's today gain some insights and focus on the functions of Manifold Valves and some tips for their maintenance. 

 

Functions of a Manifold Valve 

The manifold valve is very useful in controlling fluids or gases. The valves of a hydraulic system can consist of a needle, a ball, bleed, and vent valves. In the example of a block and bleed manifold, the motive is to assure that the fluids from upstream do not come into connection with the parts from downstream. This is attained by separating the flow of the fluid in the system.

 

As a manufacturer and supplier of manifold, we consist of the following key features: 

  1. T bar for the respite of operation
  2. Identical lid
  3. Gland adjuster bolt nut
  4. The spindle top provides a bubble-tight shut-off to assure the user of a leakage-free achievement and downstream available safety. 
  5. Valve bonnet with replaceable bonnet locking washer configuration. 
  6. Gland filler to deliver full sealing with the lowest air adjustment. 
  7. Bonnet/body washer guaranteeing precise atmospheric leakage and enabling on-site retrofit of bonnets with 100% resealing verification. 
  8. Anti-blowout spindle developed for short torque procedure with high-quality micro reflector stem end for optimistic gland sealing.
  9. Anti-rotational point brush to ensure uniform loading reduction, maximizing pressure-tight sealing, and restricting cold flow hallways.
  10. Gland packing adjuster to adjust gland grate reimbursement. 
     

How to maintain a Manifold Valve? 

The manifold valve can be fixed up easily but everything requires maintenance. You can maintain your manifold valve as: 

  • Users of a manifold valve must deliver color alterations according to the manufacturer's or supplier's teachings and operate keeping guides for any basic tools or fixtures.
  • A decent suggestion is to warm the manifold before the nozzles and bridge. This authorizes the manifold ports to glide more easily across the back of the nozzles during elaboration, minimizing the grip between these two units.
  • Users must clean and examine rolling parts for damage, destruction, and grease levels, particularly when the tooling is near compassion, and operating in polluted situations, with his heat, and under pressure. 
     

Conclusion

Techtube is a manufacturer and supplier of manifold valves and delivers you with the best furnishing manifold valves. Do check it out on the website and have amazing purchasing according to your requirement. 

 

 

For More Details on  Functions of a Manifold Valve How to maintain a Manifold Valve contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.
 

 

Go Back

How to choose a Manifold Valve? | Techtubes

The distribution and controlling of your system in your industry help in the smooth and productive functioning of your enterprise. Looking for an amazing Manifold Valve. Let's know some basics regarding this manifold valve. 

What is a Manifold Valve?

A valve that helps in the control of fluids in your hydraulic system is known as a manifold valve. 
 

It is a device that adjoins more than one block valve or isolated valve. Manifold valves are consumed largely throughout the oil and gas enterprise for the ratio of gases and fluids. 
 

They are designed to merge numerous intersections into a single channel or divide an isolated inlet into numerous intersections. 

Things to remember while choosing a manifold valve

It is important to have a manifold valve. But you can't select any of the manifolds as some of the things you should keep in mind while choosing a manifold valve and they are: 

1. Material

A manifold valve can be produced of either metal or plastic. But, the resistivity of these materials is different so it is important to be familiar with the material of your manifold properly. This will help in the avoidance of any damage while the distribution of fluids or gases. 

2. Port Size

Manifolds valves give a combination of intake and outcome refuge choices for the management valves and fittings needed for an application. Be clear to determine elements with a similar thread size to accelerate the induction in the production refuges of the collector when developing your fluid control path.

3. Number of Stations

Manifold valves are being proposed from two to ten stations for the collectors. But, you can use the stations up to a certain limit only when needed. For this, customized collectors help in fulfilling your requirement in your circuit. 

4. Spacing

Manifold valves should consist of an accurate spacing between their outcome refuges. This will help in the smooth functioning of your distribution system of fluids and gases. There should be no interference of your parts with other elements. 

5. Operating Pressure

The manifold valve operating pressure depends upon the material used in it. You should have to examine the operating pressure of your manifold valve from the manufacturer who is proposing you a manifold valve. 

6. Placement

You should have to evaluate all the financial and physical planning while placing a manifold valve. As a collector or creator, you need to work smartly and efficiently with limited resources rather than wasting your resources unnecessarily. 


Are you looking for a Manifold Valves Manufacturer and Supplier, Techtube will be best option for you.

 

For More Details on  How to choose a Manifold Valve contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.
 

Go Back

How to maintain a 2 Way Manifold Valve?

You're aware that there are three types of manifold valves: two-way, three-way, and five-way. Let's look at the two-way manifold valve and how to maintain it now.

What exactly is a two-way manifold valve?

A two-valve manifold is a device that ensures that the capsule's range is not exceeded. Separation of the transmitter from the method circle is also possible. Two block valves, a high-pressure piece valve, and a low-pressure piece valve make up this system.

 

The method for testing pressure on a pressure transmitter is to shut down the block valve and unlock the drain valve. After you've cleared the drain valve, you'll be required to connect it to a pressure generator to test the pressure. A block and bleed valve is another term for a two-valve manifold.

Applications of 2 way manifold valve 

Two-way manifold valves are used in a variety of situations. They are. 

  • It is used to control fluids and as equipment in the gas and oil industries.
  • It's used to regulate pressure, control reactions, and transfer heat.
  • It's utilized in petrochemicals and for regulating gasoline and other fluids.
  • Because it is utilized in the separation and regulation of fluids, salt can be easily removed from saltwater.
  • It is utilized in chemical processing because it maintains the necessary temperature for the chemical, making it useful in the chemical industry.

Valve maintenance for a two-way manifold

The two-way manifold valve can be readily repaired, but everything needs to be maintained. You may keep your manifold valve in the following condition:

1. Work by the instructions

Users of a two-way manifold valve must follow the manufacturer's or supplier's instructions for color changes and use keeping guides for any basic tools or fixtures.

2. Warmth is essential wherever it is needed

Warming the 2 way manifold valve before the nozzles and bridge is a good idea. This allows the manifold ports to slide more freely across the backs of the nozzles during the elaboration process, reducing the grip between the two components.

3. Maintain the cleanliness of your tool.

Users must clean and inspect rolling components for damage, destruction, and grease levels, especially when the tooling is near compassion, operating in dirty environments, and under pressure. 

 

Techtube is one of the best manufacturers and suppliers of fittings and fixture equipment to make you go with your work and expand your business. Go and be successful!!

 

 

For More Details on  How to maintain a 2 Way Manifold Valve contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.

Go Back

What is a High Pressure 3 Way Manifold Valve

Manifolds are widely used and operated equipment at construction and manufacturing sites. Techtube ensures that its customers should be at ease with their work without any problems or obstacles. 

 

For that, we are the manufacturer and supplier of these fittings and instrumentation and will provide you a guide regarding a 3 way manifold valve. Are you curious to know? For that let's start.  

What is a high pressure 3 way manifold valve? 

The high-pressure 3 way manifold valves are typically used to set pressure in a circuit to counterbalance weight or outer pressure. The major part of the valve is associated with the rod end of the cylinder, and the pressure setting is scarcely greater than what is desired to maintain the weight from free-falling.

 

A high-pressure three-way valve manifold is more usually made as monolithic equipment, with the three-way valves shaping into one solid block of metal and connected to the pressure transmitter through a flanged face with O-ring seals.

 

The blocking valves are opened and the equalizing valve is tightly closed in normal functioning mode, preventing fluid from flowing from the high to the low-pressure side. The block valves are closed and the equalizing valve is opened for calibration or maintenance. To close the valves, close the high-pressure valve first, then open the equalizing valve, and then close the low-pressure valve.

Putting a Three-Valve Manifold Differential Pressure Transmitter into Service

The steps outlined below can be used to valve a pressure transmitter manifold.

  1. Study to detect if all of the valves are shut down.
  2. Open the equalizing valves to ensure that the pressure on both sides of the transmitter manifold is the same. The formal name for this uniform pressure is zero differential pressure.
  3. Turn the higher pressure block valve on slowly. Make sure there aren't any leaks on both sides of the transmitter.
  4. Close the equalizing valve so that pressure on both sides of the transmitter is equal.
  5. To put pressure on the low-pressure side of the transmitter, open the low-pressure block valve.
  6. Allow the valve to remain open until the differential pressure reaches a safe level

Conclusion

A high pressure 3 way manifold valve is one of the best solutions for controlling the high temperature and high-pressure flow of fluids and gases. Place the order for this amazing valve and enjoy its benefits. Design your experience as the best one!! 

 

 

For More Details on  What is a High Pressure 3 Way Manifold Valve contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.

 

Go Back

3 Way Manifold Valve- Uses, Types, Industries

We are the best manufacturer and supplier of this 3-way manifold Techtube. Let's get started.

Uses of 3 way manifold valve

Depending on the need, 3-way manifolds are employed in several fluid power applications. 3-way Manifolds can be used to mount valves or to consolidate pipework in both hydraulics and pneumatics. They are the connection between the valves and the refugees to be channeled into when they are utilized for installing valves.

 

3-way Manifold valve systems have the benefit of being modular; standard valves of various, easily interchangeable iterations can be converted to a 3-way manifold to personalize the circuit and the number of actuators. In addition, rather than making every valve with every version of the port, a standard valve series can be mounted to manifolds using any type of port, such as NPT, Metric, or ORB, saving manufacturing and merchandise expenses.

Types of 3 way manifold valves

Three-way manifold valves are divided into five categories. They are as follows:

1. Differential Pressure Transmitter Direct Mounting

A direct mounting for a differential pressure transmitter is a device that can consistently and reliably induce a pressure drop in a tube and then alter pressure ratios on both sides of the tube to compute flow rate.

 

A differential pressure flow transmitter can be useful in a variety of situations.

2. Differential Pressure Transmitter - Closed Coupled - Direct Mounting

The tight coupling, which combines a pressure manifold with a fire-safe process valve, is the ideal combination of a DBB root valve, process tubing, fittings, and a three-way manifold with a bracket into one unit. This type of valve also lowers the height of the installation.

3. Mounting a Differential Pressure Transmitter from afar

As the liquid level in the tank fluctuates, remote mounting seal systems react to changes in process pressures as well as changes in static pressure above the liquid. An oil-filled capillary transmits these pressure fluctuations to a differential pressure transmitter-sensor. The temperature, pressure, and media composition of the process are all compatible with the incompressible oil utilized in the capillaries and seals.

 

The transmitter is normally positioned near the high-pressure process connection or at ground level. The change in level in the tank or vessel affects the HP & LP pressure points, and this change in pressure is monitored using a differential pressure transmitter, which then determines the tank or vessel's equivalent level.

4. Transmitter with Direct Mounting

The Direct Pressure Transmitter is a pressure-measuring gadget that can be used for a variety of purposes. This single instrument may measure pressure differences, positive pressures, negative pressures, and even absolute pressures by connecting the "high" and "low" sensing ports in different ways.

5. Manifold for Gauge

Manifold gauge sets, often known as HVAC gauges or refrigeration gauges, are used to diagnose and repair refrigerators and cooling systems. They employ digital or mechanical gauges to measure low and high refrigerant pressure to diagnose problems like leaks or to help in system evacuation and recharging.

 

 

For More Details on  3 Way Manifold Valves: Uses, Types, Industries contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.

Go Back

Different types of 3 Way Manifold Valve

A 3 way manifold valve might be confusing for you as you have been through manifold valves. Today, Techtube will furnish you with some details. Let's start. 

Types of 3 way manifold valve

There are mainly 5 types of 3 way manifold valves. They are: 

1. Direct Mounting for Differential Pressure Transmitter

A direct mounting for a differential pressure transmitter is a tool that can always and reliably create a pressure drop in a tube and then manipulate pressure ratios on both sides of the tube to compute the rate of flow. 

 

Several applications can aid from the usage of a differential pressure flow transmitter.

2. Close Coupled - Direct Mounting Differential Pressure Transmitter

The perfect combination of a DBB root valve, process tubing, fittings, and 3 way manifold with bracket into one unit is the close coupling, which combines a pressure manifold with an afire-safe process valve. This sort of valve also reduces the installation's height. As a result, it lowers the danger of damage during periods of vibration.

3. Remote Mounting on Differential Pressure Transmitter

Remote mounting seal systems react to changes in process pressures as the liquid level in the tank fluctuates, as well as changes in static pressure above the liquid. These pressure fluctuations are conveyed to a differential pressure transmitter-sensor via an oil-filled capillary. The incompressible oil used in the capillaries and seals is compatible with the process temperature, pressure, and media composition.

 

The transmitter is usually installed at ground level or adjacent to the high-pressure process connection. The HP & LP pressure points are affected by the change in level in the tank or vessel, and this change in pressure is measured using a differential pressure transmitter, which subsequently determines the tank or vessel's equivalent level.

4. Direct Mounting Transmitter

The Direct Pressure transmitter is a pressure-measuring device with a wide range of applications. By connecting the "high" and "low" sensing ports differently, this one instrument can measure pressure differences, positive pressures, negative pressures, and even absolute pressures.

 

Liquid Measurement using a Differential Pressure Transmitter Differential pressure transmitters are used to monitor pressure before and after fluid passes through an obstruction like a filter or a pump. This pressure instrument, on the other hand, can also be used to detect liquid levels.

5. Gauge Manifold

Refrigerators and cooling systems are diagnosed and repaired using manifold gauge sets, also known as HVAC gauges or refrigeration gauges. They use digital or mechanical gauges to measure low and high refrigerant pressure to diagnose issues like leaks or to assist with evacuating and recharging a system.

 

 

For More Details on  Different types of 3 Way Manifold Valve contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.

Go Back

How to choose a 3 Way Manifold Valve?

Have a 3 way manifold valve from techtube but that gets some knowledge and information regarding it. Let's start. 

What is a 3 Way Manifold Valve? 

One equalizing valve and two blocking valves make up a three-valve manifold. Blue handles mark one blocking valve on the high-pressure side and the other on the low-pressure side. During normal operation, the two-block valves are open and the equalizing valve is closed.

 

The equalizing valve is positioned between the high and low process connections of the pressure instrument to provide equal pressures on both sides. The block valves give instrument isolation, and the one equalizing valve is established in green and placed between the high and low system connections of the pressure device.

Things to remember while choosing 3 way manifold valve

It is important to have a manifold valve. But you can't select any of the manifolds as some of the things you should keep in mind while choosing a manifold valve are: 

1. Material

A 3 way manifold valve can be produced of either metal or plastic. However, because the resistivity of these materials varies, it is critical to understand the material of your 3 way manifold thoroughly. This will help in the escape from any damage while the distribution of fluids or gases. 

2. Port Size

3-way Manifolds valves give a combination of intake and outcome refuge choices for the management valves and fittings needed for an application. When building your fluid control path, be sure to choose pieces with matching thread sizes to speed up induction in the collector's production refuges.

3. Number of Stations

3 way Manifold valves are being proposed from two to ten stations for the collectors. But, you can utilize the stations up to a specific end only when required. 

4. Spacing

3 way Manifold valves should consist of an accurate spacing between their outcome refuges. This will help keep your fluid and gas delivery system running smoothly. There should be no clashing or meeting of your parts with other components. 

5. Operating Pressure

The 3 way manifold valve operating pressure depends upon the material used in it. You should have to analyze the operating pressure of your 3 way manifold valve from the manufacturer who is formulating this 3 way manifold valve for you.  

6. Placement

You should go through all of the financial and physical planning when installing a 3 way manifold. As a collector or producer, you are required to operate smartly and efficiently with scarce resources rather than expanding your resources unnecessarily. 

 

 

For More Details on  How to choose a 3 Way Manifold Valve contact us on sales1@techtubes.in

***Monel, Hastelloy, Inconel, Incoloy, SMO254, Nitronic, AL6XN, Stellite, Sanicro, Tantalum, Nimonic , Alloy A286, Invar, Cupronickel etc., are the trademarks of their respective companies.

 

Go Back

8 blog posts