Menu

Tech Tubes & Fittings

Ferrule Tube Fittings, Pipe Fittings, Instrumentation Valves & Accessories

How to choose a 5 Way Manifold Valve?

Techtube is the best and most ensured site to purchase your tube fittings. Let's start. 

 

What is a 5 way manifold valve?

Instead of discharging directly at the transmitter, the five-valve manifold features a built-in bleed valve that permits the technician to expel stored pressure through tubing to a distant area. The equalizing valve is never allowed to open when both block valves are opened.

 

The equalizing valve will then allow process fluid to flow from the high-pressure side to the low-pressure side of the process (s). During normal operation, the equalizing and bleed valves are both closed, but the block valves are open.

 

During calibration 148, both the equalizer and the bleed valves are opened. Pressure transmitter 67 valve manifolds come in single block-and-bleed configurations for gauge pressure applications. Only the transmitter's "high" pressure port is used.

 

Things to be remembered while choosing a 5 way manifold valve

Before placing an order, double-check everything. Similarly, you might have the points listed below while using your 5 way manifold valve. Let's get started.

1. Material

A five-way manifold valve can be made of metal or plastic. However, because different materials have different resistivities, it's critical to understand everything there is to know about the material in your five-way manifold. This will help prevent any damage from occurring while fluids or gases are being delivered.

 

2. Dimensions of the port

Manifold valves give a combination of intake and outcome refuge options for the management valves and fittings necessary for an application. Pick parts with matching thread diameters while establishing your fluid control path to speed up induction in the collector's production refuges.

 

3. Stations in Number

There are five options. For the collectors, manifold valves with two to ten stations are recommended. However, you can only operate the stations up to a certain point when they are given to you.

 

4. Pressure at Work

The material used in a two-way manifold valve determines its operating pressure. The manufacturer who is making your 5-way manifold valve for you should determine the working pressure of your 5-way manifold valve.  

 

5. Placement

When constructing a five-way manifold, you must consider both the financial and physical factors. Instead of wasting resources, as a collector or producer, you must operate strategically and efficiently with limited resources.

 

6. 5-way spacing

The reaction ports on manifold valves should have a precise distance between them. This will aid in the smooth operation of your fluid and gas release process. There should be no clashes or peaks between your aspects and those of other units.

 

Go Back

Comment