Menu

Tech Tubes & Fittings

Ferrule Tube Fittings, Pipe Fittings, Instrumentation Valves & Accessories

2 Way Manifold Valve: Uses, Types, Industries

We are the guaranteed and quality supplier and manufacturer of this 2-way manifold Techtube. Let's get started.

Uses of 2 way manifold valve

2-way manifolds are used in a variety of fluid power applications, depending on the requirements. In both hydraulics and pneumatics, 2-way manifolds can be used to mount valves or combine pipework. When they are used to install valves, they are the link between the valves and the refugees to be funneled into.

 

2-way Standard valves of various, easily replaceable iterations can be transformed to a 2-way manifold to personalize the circuit and the number of actuators in a manifold valve system. Only a two-way valve tube is used with pressure sensors. One block valve and one drain or test valve make up a conventional 2-way valve manifold.

 

The pressure transmitter must be calibrated.

Steps: Open the drain valve after closing the block valve. Then, to test the pressure, attach the drain valve to the pressure generator.

Types of 2 way manifold valves

Two-way manifold valves are divided into five categories. They are as follows:

1. Direct Installation of a Differential Pressure Transmitter

A device that can consistently and reliably create a pressure drop in a tube and then modify pressure ratios on both sides of the tube to compute flow rate is known as a direct mounting for a differential pressure transmitter. In a variety of scenarios, a differential pressure flow transmitter can be useful.

 

2. Closed Coupled Differential Pressure Transmitter - Direct Mounting

A DBB root valve, process tubing, fittings, and a three-way manifold with a bracket are all combined into one unit with a thought connection, which combines a pressure manifold with a fire-safe process valve. This sort of valve also reduces the installation's height.

 

3. From afar, mounting a Differential Pressure Transmitter

Remote mounting seal systems react to changes in process pressures as well as changes in static pressure above the liquid when the liquid level in the tank fluctuates. These pressure fluctuations are transmitted to a differential pressure transmitter-sensor via an oil-filled capillary. The incompressible oil used in the capillaries and seals is compatible with the process's temperature, pressure, and media composition.

 

Normally, the transmitter is placed near the high-pressure process connection or at ground level. The HP & LP pressure points are affected by a change in level in the tank or vessel, which is monitored using a differential pressure transmitter, which then determines the tank or vessel's equivalent level.

 

4. Direct Mounting Transmitter

The Direct Pressure Transmitter is a pressure-measuring device with a wide range of applications. By connecting the "high" and "low" sensing ports in various ways, this same instrument may measure pressure differences, positive pressures, negative pressures, and even absolute pressures.

 

5. Gauge Manifold (Manifold for Gauge)

Refrigerators and cooling systems are diagnosed and repaired using manifold gauge sets, also known as HVAC gauges or refrigeration gauges. They use digital or mechanical gauges to measure low and high refrigerant pressure to diagnose issues such as leaks or to assist with system evacuation and recharging.

Go Back

Comment