Menu

Tech Tubes & Fittings

Ferrule Tube Fittings, Pipe Fittings, Instrumentation Valves & Accessories

Functions of Socket weld Fittings

Techtube is one of the best suppliers of socket weld fittings. To use this socket weld fitting, firstly you need to know about this amazing and portable fitting. Here is the article for you to introduce this socket weld fitting. So, let's start. 

 

About socket weld fitting

The weld that connects specialized pipe fittings like reducers, tees, and elbows to pipes is known as a socket weld. A socket weld permanently joins the pipe to the recessed section of the joint. Socket weld pipe fittings are pipe fittings that are connected using this manner. Socket Weld fittings, in a contrast to buttweld fittings, are mostly used for tiny pipe diameters (Small Bore Piping), often piping with a nominal diameter of NPS 2 or less.

 

The wielding of Fillet-type seal welds is being done to combine pipe to valves and fittings, as well as to other segments of pipe. Where the benefits of excellent leakage integrity and structural strength are important design considerations, socket welded joints are a desirable solution.

 

Due to the use of fillet welds and abrupt fitting geometry, fatigue resistance is lower than that of butt-welded construction, but it is still better than that of most mechanical joining methods. Now, let's get to know some of the functions of this socket weld fitting. 

 

Functions of socket weld fittings

Because these fittings are classified as high-pressure, they can be employed in a wide variety of industrial operations.

  • Socket weld pipe fittings, such as elbows, tees, and reducers, can be utilized in pipelines to transport poisonous, combustible, or expensive materials where the leakage is unlikely.
  • Can be used in conjunction with ASME Pipe to modify the dimensions.
  • Used in locations where plumbing is considered to be permanent. They have also been built in such a way that they can provide good flow characteristics.
  • Manufactured by ASTM A234 requirements, as well as ASME B16.11. Dimensions, pressure-temperature ratings, labeling, tolerances, and standards for carbon steel and forged carbon steel are all covered by this standard. 
  • Bars, forging, seamless forgings, and seamless pipes are examples of permissible material shapes that meet the requirements of fitting chemicals, mechanical properties, and processes.

 

Application of socket weld fitting

There are 2 common applications of socket weld fittings. 

  1. For lines transporting flammable, poisonous, or valuable materials when no leakage is allowed.
  2. Steam pressure ranges from 300 to 600 PSI, with 150 PSI steam being used sometimes.

Go Back

Comment